Keyboards
Framework opens pre-orders for its touchpad keyboard
On November 17, Framework opened pre-orders for its Wireless Touchpad Keyboard, a wireless keyboard with a built-in touchpad that uses the same key module as the Framework Laptop 12. Reserving one takes a refundable 50 USD deposit, and the first units ship in Q1 2027. It runs an open-source fork of ZMK firmware.
What Framework has confirmed
- Keys: the Framework Laptop 12 keyboard module, built with Lite-On, with 1.5 mm of travel and 19 mm key spacing.
- Layout: US English (ANSI) only for now. Framework is collecting requests for other languages through a survey.
- Touchpad: 68.8 x 85.6 mm, PixArt controller at 120 Hz, with multi-finger gestures on Windows and Linux.
- Connectivity: included USB-A dongle, three Bluetooth channels and wired USB-C, with 8 kHz polling when wired. A keyboard shortcut switches it to Mac mode.
- Build: 0.8 mm steel plate and a translucent black back cover.
- Battery: charges over USB-C and is user-replaceable; spares will be sold separately.
- Software: keys are remapped with ZMK Studio, and Framework says the firmware will be published on GitHub.
- Open files: the outer CAD and control board documentation are on GitHub under CC BY 4.0, so anyone can design 3D-printed mounts.
The announcement does not state the final price; Phoronix reports it will sell for 99 USD. Framework also does not list countries, only that it will ship to every region it already serves, so check its store before reserving from Spain.
Built for the couch, not the desk
This keyboard targets using a computer from a distance: a PC hooked up to a TV, a Raspberry Pi, a closed laptop on a desk or a tablet. With the touchpad inside, there is no need to balance a mouse on the sofa armrest, and the dongle, Bluetooth and cable let you move it between devices.
Long typing sessions at a desk are a different story. A laptop module with 1.5 mm of travel feels very different from a full-height mechanical keyboard: shorter travel, no swappable switches and keycaps tied to the module. It can make sense for a compact living-room setup; for a work or gaming desk, many people will still want mechanical keys and a separate mouse.
The open approach is what matters most for tinkerers. ZMK is the same firmware used by many community-built split keyboards, and publishing the CAD under an open licence means you can print your own stands or cases. It follows the trend we covered with Toucan and other touchpad keyboards and the Keychron Orca Echo and its trackball: pointing devices moving into the keyboard to save trips for your hand.
If you want a mechanical keyboard for your desk
The TESSEN keyboard is a 61-key 60% ANSI board with lubed linear Gateron KS-3 Milky Pro Yellow switches, PBT doubleshot keycaps and a hot-swap PCB for 3- and 5-pin MX switches. Like Framework's keyboard it connects three ways (USB-C cable, 2.4 GHz receiver and Bluetooth 5.0), and its per-key RGB with 18 effects works without installing any software. In the 3D configurator you paint each key in 8 colours and save the design with its Design ID. Shipping, returns and warranty are covered in the FAQ.
Sources
- Framework: Pre-orders open for Framework Wireless Touchpad Keyboard (17/11/2026)
- Framework: Previewing the Framework Wireless Touchpad Keyboard (21/04/2026)
- GitHub: Framework Wireless Touchpad Keyboard documentation and CAD
- Phoronix: Framework Wireless Touchpad Keyboard To Sell For $99 USD, Begins Shipping In Q1
Keep reading