Keyboards

Yuzu adds sculpted KLP Lamé keycaps to its designer

By | Published

Yuzu, the custom keycap shop, has added KLP Lamé to its online designer: an open-source, heavily sculpted profile built for ergonomic and split keyboards. The caps are 1.5 mm PBT with dye-sublimated legends, come in MX and Choc spacing, and kits start at $47.

What Yuzu launched

KLP Lamé joins the profiles Yuzu already sold (Cherry, KAM, PFF and PBS). The designer lets you pick fonts, colours and symbols, and upload your own images to print on the keys. Published prices:

Kit Keys Price
40% base 46 $47
60% kit 58 $59
Extra single key 1 $0.75

One catch: Yuzu does not offer Choc spacing with MX stems, which rules out boards like the MoErgo Go60 with Choc V2 switches. MX and Choc versions are sold separately and are not interchangeable.

What a sculpted profile is

A keycap's profile is its shape and height. In a uniform profile every key is identical, whatever the row. In a sculpted one, each key is shaped for the finger that presses it.

KLP Lamé takes this further than most. It was designed by braindefender (Nikita Shirokov) in 2023, first for Choc switches and later with an MX version, and the files are on GitHub. There are six variants: normal, normal tilted (15 degrees), thumb, saddle, saddle tilted, and saddle homing, which adds three small bumps so you can find the home position without looking. The goal is for your finger to sit in the key rather than on a flat surface.

What it means if you use a regular 60% board

A kit labelled "60%" will not necessarily fit every 60% keyboard. This is the most common trap when buying keycaps, and KLP Lamé shows it well. According to Evetech, the kits lack the long modifiers and spacebar of a conventional keyboard, because they target split boards where almost every key is 1u.

Before buying any keycap set, check three things:

  1. Stem: MX and Choc are not cross-compatible.
  2. Key spacing: Choc spacing is tighter than MX.
  3. The sizes you need: Shift, Enter, Backspace and the spacebar have specific lengths depending on the layout (ANSI or ISO).

Also worth knowing: Yuzu uses dye-sublimation, which dyes the plastic itself and can print almost any artwork. Doubleshot keycaps mould the legend from a second layer of plastic. Both keep legends from wearing off; sublimation is what makes custom images possible.

What about a TESSEN?

The TESSEN keyboard is a 60% ANSI board with 61 keys and MX-mount PBT doubleshot keycaps. The stem matches MX caps, but an ANSI layout needs long modifiers and a full spacebar, so the KLP Lamé kits are not designed for it. If you want new keycaps, look for MX sets with ANSI support. Our 60% keyboard guide walks through the full layout.

If you would rather start with a board in your own design, the 3D configurator lets you paint each key in 8 colours (Black, White, Grey, Matcha, Blue, Sky, Pink and Red) and save the result with its Design ID. Last week we covered another keycap launch for MX boards, GMK TriggerKey with adjustable actuation. For shipping, returns and warranty, see the FAQ.

Sources

Keyboards

Keep reading

All newsAll guides