Linear vs tactile vs clicky switches: which to choose
A linear switch travels straight down with no bump and no extra sound; a tactile switch has a small bump you feel just before the keypress registers; a clicky switch adds an audible click on top of that bump. If you game a lot or want a smooth feel, start with linear; if you type for hours and like knowing when a key has landed, try tactile; clicky only works if the noise bothers nobody around you, yourself included.
What changes inside
Every MX-style switch works the same way: a stem goes down against a spring until two metal leaves touch and the keyboard registers the key. That moment is the actuation point. The distance to it is pre-travel, which is usually around half of total travel, according to the Deskthority wiki. What separates the three types is the shape of the stem:
- Linear: a smooth stem. The force you feel rises only with the spring, evenly, from top to bottom.
- Tactile: the stem has a bump that rubs against the leaves and creates a peak of resistance. Once you pass it, the key gives way, and that is where it actuates.
- Clicky: adds a part that makes a click as you pass the actuation point, on top of the tactile bump.
The three types, by the numbers
Cherry MX Red, Brown and Blue are the classic reference for each family. These are the figures the manufacturer publishes for its MX2A generation (cN is roughly equal to grams of force):
| Switch | Type | Actuation force | Tactile peak | Pre-travel | Total travel |
|---|---|---|---|---|---|
| Cherry MX2A Red | Linear | 45 cN | None | 2 mm | 4 mm |
| Cherry MX2A Brown | Tactile | 45 cN | 55 cN | 2 mm | 4 mm |
| Cherry MX2A Blue | Tactile and clicky | 50 cN | 60 cN | 2.2 mm | 4 mm |
The table shows something people tend to miss: travel barely differs between the three. What changes the experience is how force is spread over those 4 mm. On the Brown you push through 55 cN at the bump before the key gives; on the Blue it is 60 cN, plus the click. On the Red, resistance climbs with no surprises.
What each one means day to day
Linear: smooth, fast repeat presses
With no bump, you can hammer the same key quickly and the motion is always identical. That suits reflex games where you press the same key again and again, and factory lubing makes that stroke even more consistent. The downside: with no tactile cue, it is easier to bottom out on every press. If you type a lot on linears, you will learn to let go earlier over time.
Tactile: knowing the key has registered
The bump tells you, without looking or listening, that the key is in. For anyone who writes or codes for hours, that helps avoid pressing harder than needed. Some tactiles are very subtle and others have a pronounced bump; the maker's force figures give you a hint of how much you will feel it.
Clicky: the clearest feedback, for everyone else too
The click is the most obvious confirmation, and plenty of people love typing with it. It has two costs, though. First, noise: in an open office, on calls or streaming with an open mic, it carries. Second, a technical one: Blue-style clicky switches have pronounced hysteresis, meaning the point where the key is ready to register again sits higher than the actuation point. As a result, according to the ASK keyboard dictionary and the Deskthority wiki, very fast repeated presses are harder, which is why they are seen as less suited to some games.
Choosing in a minute
Answer these in order and stop at the first one that fits:
- Do you work near other people, take calls or stream live? Rule out clicky.
- Do you play competitive games where you repeat keys very fast? Linear.
- Do you write or code for hours and dislike not knowing whether a key went in? Tactile.
- Do you like the sound and type in your own space? Clicky.
- Still unsure? Linear: it is the most neutral feel of the three and adds no click.
| Profile | Pick | Why |
|---|---|---|
| Competitive gaming | Linear | Even travel and no pronounced hysteresis for repeat presses |
| Coding and writing | Tactile or linear | The bump helps you stop bottoming out; linear if you prefer smoothness |
| Design with shortcuts | Linear or tactile | Modifier and letter combos are comfortable on both |
| Office, calls, streaming | Linear or tactile | Keeps the click off your mic and away from desk neighbours |
| Typing at home for fun | Clicky | The clearest feedback, if noise is not an issue |
Force, not just type
Each family has light and heavy switches. A 45 cN linear and a much heavier one feel like different keyboards. If your fingers tire, look for lower forces; if you often trigger keys by resting your hands, a slightly higher force helps. Always check the maker's spec sheet: trade names (colours, flavours) are not a standard across brands.
The most reliable method: try them
Tables point the way, but feel is personal. The cheapest way to decide is a switch tester or, if your keyboard is hot-swap, swapping a few switches on the keys you use most (WASD or the home-row letters, for example) and comparing for a week. That way you decide with your own fingers, not someone else's opinion.
What the TESSEN keyboard uses
The TESSEN keyboard ships with lubed Gateron KS-3 Milky Pro Yellow linear switches, plus lubed Gateron stabilisers and internal foam. That matches the broadest profile in the table: gaming, code and design. If you later want to try tactile or clicky switches, the PCB is hot-swap and takes 3- and 5-pin MX switches (not low-profile or optical), so you can change them without soldering.
It is a 61-key ANSI 60%; if you are unsure about the format, read our 60% keyboard guide. You can design it key by key in the 3D configurator, from €119.99 including VAT, and questions about shipping, returns and warranty are answered in the FAQ.
Sources
Keep reading